高电压降小电压冲击试验报告仪（耐电弧放电冲击试验报告仪）-（估算机掌握）

High voltage low current tester (arc resistance tester) - (computer control)

护肤简称称：耐电弧试验机

Product name: electric arc resistance tester

护肤品规格型号：NDH-A

Product model: NDH - A

足够标准的：GB/T 1411-2002《固态垃圾耐压板材耐高压得过低功率弧光自放电的检验》（符合IEC  61621-1997）及ASTM D495等规范的标准要求规划加工的，并具备IEC 149、UL 746A等检验方法步骤

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要的适于超范围及技能：

本试验台机是明确应中用电动机、电和家庭用电量等服务行业的电工作业用金属、光敏树脂材料胶和隔绝带漆等隔绝带板材的耐焊弧稳定性参数评比，主中用胶体隔绝带板材如：金属、胶片、光敏树脂材料、矿石、卫浴陶瓷、的玻璃、隔绝带油、隔绝带漆、瓦楞纸等导电介质的耐焊弧稳定性参数软件测试；

本检测机由计算方式机控住行驶，可不可以展现之前检测状态下及检测时间段，检测终结后并上传之前检测大数据，并可word打印.原则进行实验意见书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为上三合一成分，下部分为基本操作系統，上端为试验台箱。

2 本车辆运用*新智力掌握技术性，根据抉择步骤（IEC或ASTM）可智能进行经过多次实验发现，并在电脑主机上界面显示校正时候和导致。

3 **效果更好，抗侵扰功能强，测式准确较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时间段计算误差：高于 ±10ms

2 调压器数量：2kVA

3 电机额定功率冲击试验电压值：12.5kV

4 实验电流要求：±3%

5 交流电保持精确：±10%  直流电压衡量精确：1.5%

6 金属电极对试板的压力：（0.5±0.05）N

7 金属电极材料：钨棒

8 电极片路程：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用生态室温：（23±2）℃

10 施用大环境内部含水率：（50±5）%

11 电源开关：220V±5%  50Hz  10A

12 做实验的时候    策略：   国家标准下载/美标/10 mA 不断/20 mA 反复/30 mA连续式/40 mA多次

13 试验检测方式下列：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 商品规格：

NDH-A    耐脉冲试验装置仪-微机管理

NDH-B    耐电孤校正仪-接触屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！